February 2017-OBD365.com

El-50448 Auto TPMS Activation Tool OEC-T5 is made to work on GM Series vehicles. Here is the El-50448 instructions on resetting 2012 Chevy Cruze tire pressure monitor sensors. Very easy to operate.

Purpose:

To relearn 2012 Chevy Cruze TPMS

Device used:

Step 1: Get in car TPMS learn mode

How to get into Chevy Cruze TPMS mode?

*WITH STANDARD IGNITION:1. Set parking brake.
2. Turn ignition to ON/RUN (engine off)
3. Use the MENU button to select the VEHICLE INFORMATION menu in the DRIVER INFORMATION CENTER (DIC).
4. Use thumbwheel to scroll to the Tire Pressure menu item screen.
5. Press the SET/CLR button to begin sensor matching process. A message requesting acceptance of the process should display.
6. Press the SET/CLR button again to confirm selection.

*WITH PUSH-BUTTON START:

Press and hold the push button start until the vehicle is in accessory mode. Note: on Cadillac models you will know when you are in accessory mode the Cadillac emblem appears on the DIC.
Press the MENU button located on the turn signal lever until “VEHICLE INFORMATION MENU” is displayed.
Once you are in the VEHICLE INFORMATION MENU, use the ^ v on the turn signal level until the DIC displays the vehicle’s tire inflation pressure and positions.
Press and hold the button located on the end of the turn signal level until “Are you sure that you want to relearn? YES or NO” is displayed.
Use the ^ v on the turn signal lever to highlight YES. Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, “Tire Learning Active” will be displayed on the DIC, and the left front turn signal will be illuminated.

Step 2: Get out of the car and use EI-50448 OEC-T5 to close to each valve stem

Note: Beginning with the left front tire, Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. You can then turn the vehicle off to exit “learn mode.”

(Starting with Left Front tire -> Right Front -> Right Rear -> Left Rear)