2009 Chevrolet HHR key fob programming with Tech 2 clone

Success! Have tested Tech 2 clone for 2009 Chevrolet HHR key fob!

The detail… Here you go.

Install the GM Tech 2 scan tool
Turn ON the ignition with the engine OFF
Power On the Scan Tool
Hit Enter
Main Menu > F0: DIAGNOSTICS

Vehicle identification – Model Year > (9) 2009

Vehicle identification – Product Type > Passenger Car

Vehicle identification – Product Make > (1) Chevrolet

Vehicle identification – Product Line > A

Diagnostics > F1: Body

Body> F5: Remote Control Door Lock Receiver

Remote Control Door Lock Receiver > F5: Module Setup

Module Setup > F1: Program Key Fobs

Program Key Fobs > F0: Invalidate all key fobs

Instructions:

The procedure will replace the previously programmed key fob with the key fob requiring programming.

(Follow Instructions, if it don’t work repeat entire procedure)

All desired key fobs must be present.

When the first key fob is programmed, the module will erase the rest of the slots.

The module will fill slots until [Done] or [Exit] is selected.

Note: Only select [Start] once. If the procedure is started again, the control module will start over.

Job’s done! http://www.obdii365.com/producttags/gm-tech2.html

http://www.obdii365.com/service/program-2009-chevrolet-hhr-key-fob-with-gm-tech2-107178.html

Tech2 off obdii365.com Reached A Positive Solution

This was my order of GM Tech2 scan tool with TIS2000 software:

http://www.obdii365.com/wholesale/high-quality-gm-tech2-gm-diagnostic-scanner-1362.html

Order Date: Aug 26, 2018

Ship to: United States

This is how GM Tech 2 looks out of the box:

Turned on:

The following 3 paragraphs are what I mail to obdii365.com:
I tested device and it works well. Problem is the screen. I believe for return I would have to send back and pay for shipping. This would take a long time and I have work to do using the tool.

Right now I am using a laptop connected so I can see the full screen

I would rather do partial refund or try replacing the screen myself.

Will you do a partial refund?

Can you send or help me find a replacement screen?

I have been happy so far with obdii365.com so far. The price, service and shipping speed was good.

I hope we can reach a positive solution.

Finally, obdii365.com ship me a new package.

Just want to let you know, I finally took the time to really test out the replacement I was sent and it appears to work perfectly.

One small issue is that I was sent a GM PC Card and not a Saab one. I tried to write the GM Card in my laptop to Saab software but I ended up damaging the card. It was my fault. I know that I could have contacted you for help and you would have taken care of me.

I was able to find another Saab Card and get it working so I am very happy now. I do not need any more help.

 

http://blog.obdii365.com/2018/12/31/gm-tech2-review-reached-a-positive-solution-from-obdii365/